Balancenum - TechnoKom AutoGRAPH-ST Command Manual

AutoGRAPH- ST – Remote Control Command

BALANCENUM

Command
Name
Supported with firmware
Description
Command format:
password BALANCENUM=number,email,sms;
parameters of the command:
 number – a code for checking SIM balance.
 email – sending balance state in Email together with coordinates.
0 – not enabled;
1 – enabled.
 sms – sending balance state in SMS together with coordinates:
0 – not enabled;
1 – enabled.
Sample command:
5672 BALANCENUM=*100#,0,1;
Sample reply:
BALANCE=*100#,0,1;
The device has following settings: the code "*100#" is used to check balance; balance
state is sent in SMS along with position coordinates.
16
BALANCENUM
SIM Balance Checking Settings
AGST-0.81 and higher
Command is intended for specifying a code for checking
balance of the device SIM card and setting parameters
of notifying about balance state.