Table of Contents
Advertisement
MAPFORMAT
Command
Name
Supported with firmware
Description
Command format:
password MAPFORMAT=format;
parameters of the command:
format – format of coordinates in messages:
0 – Yandex – coordinates will be sent as a link to Yandex Maps Service;
1 – Google – coordinates will be sent as a link to Google Maps.
2 – Coordinates – coordinates will be sent in standard format – longitude and latitude
values.
Sample command:
5672 MAPFORMAT=1;
Sample reply:
#MAPFORMAT=1;
The device is specified to send coordinates as a link to Google Maps.
Note:
MAPFORMAT command is supported by AutoGRAPH-ST devices with a
firmware of version AGST-1.11 and higher.
MAPFORMAT
Coordinate format for SMS and Email
AGST-0.75 and higher
Command
is
intended
coordinates for sending by means of SMS and Email.
The device can send coordinates as a link to one of the
map services. This feature is convenient for monitoring
the AutoGRAPH using different mobile devices.
AutoGRAPH-ST – Remote Control Command
for
specifying
format
of
15
Advertisement
Table of Contents
