Table of Contents
Advertisement
TKR
Command
Name
Supported with firmware
Description
Commands format:
password TKR PeriodUnit;
parameters of the command:
Period – period of recording the data.
Unit – unit of Period:
H – period in hours, from 1 to 24 hours.
M – period in minutes, from 10 to 1440 minutes.
Sample command:
5672 TKR 90M
Sample reply:
#TKR 90M
Tracker profile is activated in the device. It will switch to the tracking mode, acquire the
coordinates and record the data with period of 90 minutes. After that the device will switch
to sleep mode. By default the device will send collected data to the data server every 24
hours.
TKR
Tracker profile activation
AGST-1.12 and higher
Command is intended for enabling Tracker profile. If the
profile is enabled, the device acquires position data with
specified period and records the data into internal
memory. With another period the device send the
collected data to the server. Default data transfer period
is 24 hours.
AutoGRAPH-ST – Remote Control Command
55
Advertisement
Table of Contents
