Table of Contents
Advertisement
ACCLSETUPSEND
Command
Name
Supported with firmware
Description
Command format:
password ACCLSETUPSEND=sms, data,email;
parameters of the command:
sms – send SMS notification to all telephone numbers, specified in the device, when
accelerometer triggers:
0 – disabled;
1 – enabled.
data – send all collected data to server when accelerometer triggers:
0 – disabled;
1 – enabled.
email – send notification to all email addresses, specified in the device, when
accelerometer triggers:
0 – disabled;
1 – enabled.
Sample command:
5672 ACCLSETUPSEND=1,1,0;
Sample reply:
ACCLSETUPSEND=1,1,0;
The device is set up to send SMS notification and data to server when accelerometer
triggers.
ACCLSETUPSEND
Accelerometer notifications settings
AGST-0.75 and higher
Command is intended to set up notifications which the
device sends when internal accelerometer triggers.
AutoGRAPH-ST – Remote Control Command
41
Advertisement
Table of Contents
