Control cabinet structure
Control cabinet requirements
Protection against electromagnetic interferences
•
Compliance with the ambient conditions of the installed components
•
Mounting plate requirements
The mounting plate must be electrically conductive.
•
Use zinc-coated mounting plates or mounting plates made of V2A.
-
Varnished mounting plates are unsuitable, even if the varnish is removed from the con-
-
tact surfaces.
When using several mounting plates, make a conductive connection over a large surface
•
(e. g. using grounding strips).
Arrangement of components
Division into power and control areas
•
Fig. 1: Example for the ideal arrangement of components in the control cabinet
Information on project planning
Control cabinet structure
Arrangement of components
39