Profibus - Lenze i550 Series Project Planning Manual

Product extensions
Networks

PROFIBUS

PROFIBUS
PROFIBUS is a common fieldbus for the connection of inverters to different control systems in
plants.
General information
Design
DC supply of the control electronics
and optional fieldbus
Bus-related information
Name
Communication medium
Use
Connection system
Status display
Connection designation
Technical data
Communication profile
Bus terminating resistor
integrated bus terminating resistor
Network topology
Without repeater
With repeater
Station
Type
Max. number without repeater
Max. number with repeater
Address
Baud rate
Max. bus length
Max. cable length between two nodes
Process data
PZD
Transmission mode
Data length, cyclic
Identification number
User data
Cyclic (DP-V0)
Acyclic (DP-V1)
Communication time
Communication time depends on
230
Optional
Integrated in standard I/O
internally via the inverter
optionally:
External supply
PROFIBUS-DP
RS485
Connection of the inverter to a PROFIBUS-
DP network
9-pole Sub-D socket
2 LEDs
X226: Pin 1 ... 9
PROFIBUS-DP-V0
PROFIBUS-DP-V1
Ω 120
No
Line
-
Slave
32
125
1 ... 127
kbps 9.6 ... 12000
m 1200
not limited, the max. bus length is deci-
sive
1 ... 16 words (16 bits/word) in each direc-
tion
1 ... 16 words, process data channel + 4
words of disconnectable parameter data
channel
0x0E550
4 bytes
Max. 240 bytes
Processing time in the inverter
Telegram runtime (baud rate, telegram
length)
Nesting depth of the network
Bus load
Mains-dependent
Mains-independent
24 V DC
at X3/24E...GND
DRIVECOM parameter data channel
PROFIdrive parameter data channel
Terminated on both sides
per bus segment, incl. host system
Adjustable via code or DIP switch
Automatic detection for cable type A (EN
50170)
Per bus segment, depending on the baud
rate and the used cable type
max. 32 bits (4 bytes) as a coherent PDO
object
Time between the start of a request and
arrival of the response