Errors During Calibration - palintest Macro 900 Operation Manual

Macro 900 Operation Manual V3
After successful calibration, the 'Calibrating 100%' screen will be displayed
along with the Calibration Report, which will show the voltage output from the
probe in millivolts (mV). Press the OK key to continue. The reading on the
Macro 900 Meter directly after calibration should be approximately 200,000
cells/L at 20ºC (this value will vary with temperature).
Calibration is now complete.
15.3.8.

Errors During Calibration

If a problem occurs during calibration, an error message will be displayed.
Refer to Error! Reference source not found. in section 10 for error message
handling.
© 2013 Palintest Ltd. www.palintest.com Page 71 of 147