Errors During Calibration - palintest Macro 900 Operation Manual

Macro 900 Operation Manual V3
solution is required. The solution can be at any temperature between 5ºC and
30ºC.
To calibrate the ISE electrode follow the steps outlined above under three-point
calibration for points 1 only.
16.8.5.

Errors During Calibration

If a problem occurs during calibration, an error message will be displayed.
Refer to Error! Reference source not found. in section 10 for error message
handling.
© 2013 Palintest Ltd. www.palintest.com Page 118 of 147