Displaying Gps Co-Ordinates - palintest Macro 900 Operation Manual

Macro 900 Operation Manual V3
To view any of the logged data records, simply click on the desired Tag, date
and time label as shown above. The data for the highlighted label will be
displayed in the individual data boxes, which are grouped by electrode function.
Any data that is unavailable or out of range will be displayed as dashes. To
move up and down the Tag/date/time column, use either your mouse or the
cursor up/down keys.
Remember, the Macro 900 Meter stores all logged data in a raw Probe format,
so can be made to output logged data in several different forms, dependent
upon the Meter's current settings. See Important Information About Memory
Mode in section 8 for more information.

17.5. Displaying GPS Co-ordinates

On the right of the screen, the position at which the data was logged is
displayed in the GPS boxes. Latitude and longitude can be displayed as Degrees
and decimal Minutes (DD MM.MMMM) or as decimal Degrees (DD.DDDDD).
Select one format or the other by clicking one of the two options at the bottom
of the GPS box. Positional accuracy of lat/lon co-ordinates is +/- 10 meters with
a 3D Position fix.
GPS position is also displayed as an Ordnance Survey Great Britain (OSGB) grid
reference, (if the position falls within the United Kingdom) and UTM (Universal
Transverse Mercator) co-ordinates. Positional accuracy of OSGB co-ordinates is
+/- 1 digit (i.e. +/- 100 metres). Positional accuracy of UTM co-ordinates is
+/- 10 metres with a 3D Position fix.
© 2013 Palintest Ltd. www.palintest.com Page 121 of 147