Appendix 3. Fitting Aux Electrodes; Installing Aux Electrodes - palintest Macro 900 Operation Manual

Macro 900 Operation Manual V3

23. Appendix 3. Fitting AUX Electrodes

There are two different types of AUX Electrodes designed for use with the MAP
2000/2100. These are Optical Probes and ISE Electrodes. Optical Probes can be
identified by the four-section gold connector whilst ISE Electrodes feature a
single pin gold connector.
Optical Probes are designed to fit into the MAP 2000/2100 socket labelled
AUX1. ISE Electrodes are designed to fit into the MAP 2000/2100 socket
labelled AUX2.

23.1. Installing AUX Electrodes

First, identify the type of electrode you are installing, then remove the blanking
plug from the relevant AUX socket on the MAP 2000/2100. To remove the
blanking plug and subsequently tighten the AUX Electrode, use the red lanyard
that is attached to the pH/ORP storage cap as a belt wrench as shown below.
© 2013 Palintest Ltd. www.palintest.com Page 137 of 147