Parts Replacement & Repair; Replacing The Generator Pcb - Planmeca Intra Technical Manual

8 PARTS REPLACEMENT & REPAIR
WARNING
Make sure that the power supply is switched off before starting
parts replacement.
8.1

Replacing the Generator PCB

1. Unscrew the three M4x6 ULS screws and remove the generator cover.
Generator cover
Figure 12
Technical Manual
Complies with
DHHS radiation
performance
standards
21 CFR
Subchapter J. 220V - 240 V 8 AT 70kV maximum 1800 mAs/h
100V - 115 V 15 AT Total filtration: 2,0 mm EquAl
WARNING: 1000VA 50/60Hz
For continued protection Manufactured by:
against risk of fire replace Planmeca OY
only with same type and 00880 HELSINKI
0537
rating of fuse. FINLAND LBL-Z-006D
PARTS REPLACEMENT & REPAIR
Planmeca Intra X-ray unit 35