Planmeca Intra Technical Manual page 50

PARTS REPLACEMENT & REPAIR
17. Pull the Dixi interconnection cable out from the bracket arm opening. Connect the Dixi
interconnection cable to the Dixi control box or push the cable into the bracket arm. Attach
the cover plug to the bracket arm opening.
Figure 26
18. Attach the tube head to the support frame with the five M4x8 DIN 7984 screws.
19. Slide the tube head PCB into its position and connect the feedback cable to the tube head
PCB terminal P1.
20. Connect the arm cable leads to the connectors as described in figure 27 below.
Figure 27
46 Planmeca Intra X-ray unit
Dixi interconnection
cable
Red
Black (thin)
White
Black
Blue
-
Yellow
-
Yellow
Technical Manual