Planmeca Intra Technical Manual page 49

15. Insert the RJ45 connector into the cable crimp tool. Press the handles of the crimp tool as
far as they will go. Check with the cable tester that the cable is functioning.
Figure 24
16. Check the RJ45 connector to make sure that the cable is properly attached to the
connector.
RJ45 connector before crimp
RJ45 connector after crimp
Figure 25
Technical Manual
Wires
11mm
Wires
PARTS REPLACEMENT & REPAIR
UTP Cable
UTP Cable
Planmeca Intra X-ray unit 45