Profinet Io Interface - Siemens SIMOTION D4 Series Manual

3 RXP
4 - - -
5 - - -
6 RXN
7 - - -
8 - - -
I = Input; O = Output; B = Bidirectional
Autocrossing functionality (if required, transmit and receive lines switch over)
1)
Note
The MAC addresses are imprinted on an adhesive label that is located behind the protective
cover and can be seen from the front.
3.4

PROFINET IO interface

PROFINET is an open component-based industrial communication system using Ethernet
for distributed automation systems.
SIMOTION D4x5-2 DP/PN has a PROFINET interface with three ports (X150 P1-P3)
onboard. The PROFINET interface supports operation of a SIMOTION D4x5-2 DP/PN as an
IO controller and/or as an I device.
SIMOTION D4x5-2
Manual, 11/2010
I Ethernet
receive
differential
signal
- - - Reserved, do
not use
- - - Reserved, do
not use
I Ethernet
receive
differential
signal
- - - Reserved, do
not use
- - - Reserved, do
not use
3.4 PROFINET IO interface
DB+ B
DC+ B
DC B
DB- B
DD+ B
DD- B
Interfaces
Bidirectional
pair B+
Bidirectional
pair C+
Bidirectional
pair C-
Bidirectional
pair B-
Bidirectional
pair D+
Bidirectional
pair D-
45