Profinet Io Interface (Only For Simotion D4X5-2 Dp/Pn) - Siemens SIMOTION D4 5-2 Series Manual

3.4

PROFINET IO interface (only for SIMOTION D4x5-2 DP/PN)

PROFINET is an open component-based industrial communication system using Ethernet
for distributed automation systems.
SIMOTION D4x5-2 DP/PN has a PROFINET interface with three ports (X150 P1-P3)
onboard. The PROFINET interface supports operation of a SIMOTION D4x5-2 DP/PN as an
IO controller and/or as an I device.
Interface position
The following figure contains information on the PROFINET interface of the control unit.
Position of the interface, labeling of the ports and the associated displays are described.
Figure 3-4 The position of the PROFINET X150 P1 to P3 interfaces and their displays (SIMOTION D445-2 DP/PN)
Note
The 3rd port of the PROFINET IO interface X150 P3 is also designated as X120 PN/IE OP.
This designation is not relevant for SIMOTION D.
SIMOTION D4x5-2
Manual, 02/2012
3.4 PROFINET IO interface (only for SIMOTION D4x5-2 DP/PN)
Interfaces
55