Table of Contents
Advertisement
xii
C
: S
R
I
HAPTER
UPPLEMENTARY
EGULATORY
NFORMATION
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations you
make to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request that you disconnect the
equipment.
CE Notice
Marking by the symbol CE indicates compliance of the equipment with the
EMC, Telecom and Low Voltage dIrectives of the European Community. Such
marking is indicative that this equipment meets or exceeds the following
technical standards.
EN55022 - Limits and methods of measurement of radio interference
characteristics of information technology equipment.
EN50082-1 - Electromagnetic compatibility - generic immunity standard part 1:
residential, commercial, and light industrial.
CTR 12 - Connection of 2 Mbit/s Unstructured Leased Lines.
CTR13 - Connection to 2 Mbit/s Structured Leased Lines.
EN 60950 - Safety of Information Technology Equipment including Electrical
Business Equipment.
EN 41003 - Particular safety requirements for electrical equipment to be
connected to Telecom networks.
WARNING: This customer equipment is to be installed and maintained by
service personnel as defined by AS/NZS 3260 clause 1.2.14.3. (service
Personnel). Incorrect connection of connected equipment to the General
Purpose Outlet could result in a hazardous situation.
WARNING: Safety requirements are not fulfilled unless the equipment is
connected to a wall socket outlet with protective earth contact.
Advertisement
Table of Contents
