3Com SuperStack II PathBuilder S330 Reference Manual page 169

Configuring Virtual Circuits 157
Figure 125 List Virtual Circuit Summary Screen
The List Virtual Circuit Summary Screen shows a summary of all virtual circuits,
with a virtual circuit number (VC#) assigned to each. It displays the following
information:
card—Card type.
s/p—Slot and port numbers (for side A and side B of the circuit)
Rx/Tx—Virtual circuit information specific to the card type. For example, for UNI
cards, these columns list the receive/transmit VPI/VCI (for side A and side B of the
circuit), while for CBR cards these columns list the DS0 channels.
Description—The description entered when the circuit was configured.
2 To view more detailed information about a specific virtual circuit enter the VC# of
the circuit you want to view from the List Virtual Circuit Summary screen to open
the List Virtual Circuit Detail screen. This screen displays the complete list of
parameters for both sides of the selected circuit.
Figure 126 shows a representative List Virtual Circuit detail screen.