Viewing T1/E1 Uni Card Statistics - 3Com SuperStack II PathBuilder S330 Reference Manual

186 C 5: P B
HAPTER ATH UILDER
Viewing T1/E1 UNI Card
Statistics
S330 D P
IAGNOSTICS AND ERFORMANCE
Figure 146 Card Statistics Menu
3 Enter the number corresponding to the card for which you want to view statistics.
The following sections describe the card statistics provided for each type of card.
You can view T1/E1 UNI statistics for ports or for groups.
To view T1/E1 statistics, follow these steps:
1 From the Card Statistics menu, shown earlier in Figure 146, select the option
corresponding to the T1/E1 UNI module to open the T1/E1 UNI Performance
menu.
2 Select [1] Port/Link Performance Management to view port statistics or [2] Group
Performance Management to view group statistics.
3 Enter the number corresponding to the port or group for which you want to view
statistics.
4 Select the option corresponding to the type of statistics you want to view.
Port statistics
n
PHY (Physical) Performance Monitoring
n
IMA Link Performance Monitoring
n
IMA Link ATM Statistics
n
Group statistics
n
Group performance
n
Group ATM
n
The following sections describe the statistics provided in each of these categories.
For performance monitoring statistics only, you must select the type of
performance statistics you want to view: current, interval, or total. For details
about these types of performance statistic, see "Viewing Performance and ATM
Statistics" earlier in this chapter.
S
TATISTICS