Getting Started - 3Com SuperStack II PathBuilder S330 Reference Manual

3
Logging On
G S
ETTING
This chapter tells you how to initialize and prepare SuperStack
S330 and SuperStack ®
S330/S310) for operation and how to use the PathBuilder S330/S310 menus. It
contains the following sections:
Logging On
n
Using the Menus
n
Performing Initial System Configuration
n
Performing Additional Super User Functions
n
Configuring In-band Management
n
You enter initial configuration information via the local user interface. This
interface is presented on a VT100 terminal connected to the RS-232 (console) port
on the front of the PathBuilder S330/S310, as shown in Figure 29. See Chapter 2
for details about connecting the VT100 terminal.
Set the terminal for the following:
9600 baud
n
no parity
n
8 data bits
n
1 stop bit
n
Figure 29 NMS Terminal Connection Options
10BASE-T
RS-232
VT-100
TARTED
II PathBuilder ® S310 WAN access switches (PathBuilder
LAN
NMS Terminal
® II PathBuilder ®