3Com SuperStack II PathBuilder S330 Reference Manual page 125

Figure 84 Manage Bridge Menu
2 From the Manage Bridge menu, select [1] Bridge Configuration to display the
Bridge Configuration menu, shown in Figure 85. The current aging timer setting is
displayed below the menu title (3 minutes in the sample menu shown in the
figure).
Figure 85 Bridge Configuration Menu
3 Select [1] Set Aging Timer. The following prompt appears at the bottom of the
screen:
Enter Aging Timer (minute):
4 Enter the desired timer interval, in minutes.
5 Select [2] Previous Menu to return to the Manage Bridge menu.
6 From the Manage Bridge menu, select [2] Ethernet Slot #6 Port 1 to display the
Bridge Menu for the Ethernet port, as shown in Figure 86.
Configuring the Ethernet Interface 113