WAGO 750-341 Manual page 61

Incremental Encoder Interface Modules
750-631, /000-001, -004, -006, -008
The above 750-631 Incremental Encoder Interface modules have 5 bytes of
input data and 3 bytes of output data. The following tables illustrate the Input
and Output Process Image, which has 4 words mapped into each image. Word
alignment is applied.
Offset
Offset
750-631/000-003, -005, -007
The above 750-631 Incremental Encoder Interface modules have 4 bytes of
input data. The following table illustrates the Input Process Image, which has
2 words mapped into the image. Word alignment is applied.
Offset
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
Byte Destination
High Byte Low Byte
0 -
1 D1
2 -
3 D4
Byte Destination
High Byte Low Byte
0 -
1 D1
2 -
3 -
Byte Destination
High Byte Low Byte
0 D1
1 D3
Input Process Image
S
D0
-
D3
Output Process Image
C
D0
-
-
Input Process Image
D0
D2
Fieldbus Coupler 750-341
Process image
Remark
Status byte
Counter word
not used
Latch word
Remark
Control byt
Counter Setting word
not used
not used
Remark
Counter Value
Latch word
• 57