WAGO 750-341 Manual page 169

Instance 199 (C7
This instance is used to establish a connection based on an existing exclusive
owner connection. The new connection also has the same transmission
parameters as the exclusive owner connection. When the exclusive owner
connection is cleared, this connection, too, is automatically cleared. The data
length of this instance is always zero.
This instance can only be used in the "consumed path" (from the point of view
of the slave device).
Common Services
Service code
0E hex
10 hex
7.3.2.7 Port Class (F4
Class
Attribute ID Access
1
2
3
8
9
Instance 1
Attribute
ID
1
2
3
4
7
Common Services
Service code
01 hex
0E hex
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
)
hex
Service available
Class Instance
yes yes
no yes Set_Attribute_Single
)
hex
Name
Get Revision
Get Max
Instance
Get Num
Instances
Get Entry Port
Get All Ports
Data
Access Name
type
Get V Port Type
Port
Get V
Number
Port
Get V
Object
Get V Port Name
Node
Get V
Address
Service available
Class Instance
yes yes Get_Attribute_All
yes yes
Ethernet/IP (Ethernet/Industrial Protocol)
Service Name
Description
Get_Attribute_Single Supplies contents of the appropriate attribute
Modifies an attribute value
Data type Description
UINT Revision of this object
UINT Max. number of instances
UINT Number of current ports
UINT Instance of the port object where
the request arrived.
Array of Struct Array with instance attributes 1
UINT and 2 of all instances
UINT
Description Default value
UINT -
Cip Port number
UINT
Number of 16 bit words in the
UINT
following path
Padded Object, which manages this port
EPATH
Short String Portname
Padded Port segment (IP address)
EPATH
Service Name Description
Supplies contents of all attributes
Get_Attribute_Sing Supplies contents of the appropriate attribute
le
• 165
Object model
Default value
1 (0x0001)
0x0001
0x0001
0x0001
0x0000
0x0000
0x0004
0x0002
Attribute ID
0x0004
0x0002
(Ethernet/IP)
0x0002
0x20 0xF5
0x24 0x01
0x00
-