WAGO 750-341 Manual page 165

7.3.2.3 Explanations of the Object Description
Attribute ID:
Access:
NV:
Name:
Data type:
Description:
Default value: Factory settings
7.3.2.4 Identity (01
Class
Attribute
ID
1
2
3
4
Instance 1
Attribute
ID
1
2
3
4
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
Integer value which is assigned to the corresponded attribute
Set The attribute can be accessed by means of Set_Attribute services.
Important: All the set attributes can also be accessed by means of
Get_Attribute services.
Get The attribute can be accessed by means of Get_Attribute services
NV (non volatile) The attribute is permanently stored in the coupler.
V (volatile)
Note: If this column is missing, all attributes have the type V
Designation of the attribute
Designation of the CIP data type of the attribute
Short description for the Attribute
)
hex
Access Name
Get Revision
Get Max Instance
Get Max ID Number
of Class
Attributes
Get Max ID Number
of Instance
Attribute
Access Name
Get Vendor ID
Device Type
Get
Get Product Code
Revision
Get
Major Revision
Minor Revision
Ethernet/IP (Ethernet/Industrial Protocol)
The attribute is not permanently stored in the coupler.
Data type Description
UINT Revision of this object
UINT Maximum Instance
UINT Maximum number of Class
attributes
UINT Maximum number of instance
attributes
Data type Description
UINT Manufacturer identification
UINT General type designation of
the product
UINT Designation of the coupler
STRUCT of:
Revision of the Identity
USINT
Objects
USINT
• 161
Object model
Default
value
1 (0x0001)
0x0001
0x0000
0x0000
Default value
40 (0x0028)
12 (0x000C)
341 (0x0155)
Depending on the
firmware