Table of Contents
Advertisement
60
One-touch edit recording
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
The recording source can be a finalized CD-R/RW, but digital-to-digital recording may not be available with
certain discs."Digital recording and SCMS"
Select the "CD" input. Be sure to put the CD recorder in stop mode.
Before recording
When digital-to-digital recording is not impossible
or when analog-to-digital recording is performed,
select the analog input as described in the follow-
ing section then start the setting from step 1
below."Changing the recording input setting"e
1
Make the preparations for recording.
1 Place a recordable CD-R or CD-RW disc.
2 Load the recording source disc in the CD player.
2
Select the recording speed.
1 Press the MENU key.
2 Press the MULTI CONTROL keys to select "O.T.E.
Speed ?", then press the SET key.
MULTI
CONTROL
3 Press the MULTI CONTROL keys to select "<Norm>",
then press the SET key.
MULTI
CONTROL
3
Check the current play mode of the CD player.
All track recording
If it is in play mode, stop it.
(O.T.E.) (Norm)
fl
¢
MENU
\
\
SET
\
\
SET
7
Convenient recording of CD player output
=
CD
CDR
A
DIGITAL
The current setting is displayed.
"DIGITAL" is lit ............. Digital-to-digital recording
"DIGITAL" not lit: ......... Analog-to-digital recording
÷ When a CD-R/RW is loaded in the CD recorder, the CD-R IN
indicator may blink for a while.
"OPC (Optimum Power Control)"
Each press switch the modes as follows.
<High> ............ (Recording at double speed)
<Norm> .......... (Recording at normal speed)
Single-track recording
Select the desired CD track and play it.
÷ Even when the O.T.E. CD=
of a track, recording will start from the beginning of the track.
6
CD
= = CDR key is pressed in the middle
= =
‡
Advertisement
Table of Contents
