Receiving Broadcast Station - Kenwood HM-982RW Instruction Manual

30

Receiving broadcast station

One-by-one pre-
setting(3)
Display switch-
ing
Tuning a non-
preset radio
station(3)
BAND
TUNER
4 ¢
3 3
One-by-one pre-
setting(2,4)
Tuning a non-
preset radio sta-
tion(2)
1. Select the tuner input.
Each press of the TUNER/BAND key switches the band as follows.
1 1
FM
AM
2. Preset a radio station in memory.
Collective presetting of stations (Auto Memory)
Follow the procedure in "Collective presetting of stations (Auto Memory)"
to preset automatically the tunable radio stations in your area.
÷ Once stations are stored by auto presetting, the present procedure is not
required from the next time, unless you move of house or re-execute presetting
of all tunable stations.
One-by-one presetting (Manual preset)
A station can also be tuned even when it is not preset. For details, read
"Tuning a non-preset radio station (Auto tuning, Manual tuning)"
3. Tuning (Preset Call)
If radio stations have already been stored
with auto presetting or manual presetting,
select a station using the 4,¢ key.
Press ¢ for the order of
1=2=3 ... 38=39=40=1...
Press 4 for the order of
40=39=38 ... 3=2=1=40...
÷ To select a preset station from the remote,
use the 4, ¢ key or numeric keys.
Press the numeric keys as shown below....
To select preset No. 12 .... +10, 2
To select preset No. 20 .... +10, +10, 0
Receiving broadcast station
Collective presetting of stations
3 3
"TUNED" indicator lights
up when a station is re-
ceived.
1 1
⁄
¤
¤
TUNED
STEREO
AUTO
F M P 0 4
9 0 . 0 0