One-touch edit recording
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Be sure to put the cassette deck in stop mode.
Make preparation for recording.
Perform steps 1 to 3 of the procedure in "Recording on TAPE". §
Ensure that the "PGM" and "RDM" indicators are not lit.
Insert disc in the CD player.
÷ If the "PGM" indicator is lit, turn it off by pressing the PGM key in stop mode to cancel the program mode.
÷ If the "RDM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
Check the current play mode of the CD player.
If it is in play mode, stop it.
To interrupt a recording
(Recording and playback will be stopped)
(CD = TAPE)
Select the desired CD track and play it.
÷ When step 3 is performed in the middle of CD play-
back, the current track will be recorded from the begin-
(To record other tracks, repeat steps 2 and 3 for each
÷ When either playback or recording stops, the other op-
eration is stopped automatically.
At the end of the recording
Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
Convenient recording methods