Kenwood HM-982RW Instruction Manual page 77

Be sure to adjust the clock before setting the timer.
4
Enter the ON time.
1 Set the timer ON time by pressing the MULTI
CONTROL keys.
To advance the time
To put back the time
2 Press the SET key.
3 After entering the "hour" with the procedure in
1 and 2, enter the "minute" using the same
procedure.
5
Enter the OFF time.
1 Set the timer OFF time by pressing the MULTI
CONTROL keys.
To advance the time
To put back the time
2 Press the SET key.
3 After entering the "hour" with the procedure in
1 and 2, enter the "minute" using the same
procedure.
6
Make the desired reservation.
For timer playback or AI timer playback
1 Press the MULTI CONTROL keys to select the timer
mode.
1 Select "Play" or "AI Play".
MULTI
CONTROL
SET
2 Press the SET key.
MULTI
CONTROL
SET
MULTI
CONTROL
SET
Play .......... Timer playback at the
volume used when
Rec
power was turned off
AI Play ...... Timer playback with
which the volume
increases gradually
from 0 to 20.
PROG.
Blinks
UN FINALIZE D
SKIP PLAY
M o d e
P l a y
Continued on next page
1 ON time setting
PROG.
UN FINALIZE D
SKIP PLAY
O N
1 0 : 0 0
Blinks
÷ If you make a mistake in the middle, press the MENU key to
cancel the operation and restart it from step 2.
1 OFF time setting
PROG.
UN FINALIZE D
SKIP PLAY
O F F
1 1 : 0 0
Blinks
÷ If you make a mistake in the middle, press the MENU key to
cancel the operation and restart it from step 2.
For timer recording
1 Press the MULTI CONTROL keys to select
the record mode.
1 Select "Rec".
MULTI
CONTROL
SET
2 Press the SET key.
Timer operation
Play
Rec
AI Play
Continued on next page
77