Table of Contents
Advertisement
26
Playback on CD recorder
Time display on CD recorder
Start playback/
To pause playback
Skipping
tracks
The label must be on top.
Do not touch the played surface.
6
CD - R
To stop playback
Playback from
desired track
To fast forward
and backward
1. Load a disc.
1 Press CD recorder tray open/close (0) key.
2 Place a disc.
3 Press CD recorder tray open/close (0) key.
The CD-R IN indicator blinks first, then it lights steadily when the disc has
been identified (now the disc is ready for playback).
÷ No adapter is necessary to play an 8 cm CD.
÷ The CD recorder can play back commercially-available music CDs. Although it can
play CD-R/RW discs which have not been finalized, it cannot play discs containing
other signals than audio signals. It may sometimes be incapable of playing a CD-
R/RW disc recorded with other equipment than this system or a PC.
÷ If the CD-R IN indicator blinks after the tray has been closed, the disc cannot be
ejected.
When a non-used disc or a disc which has not been unfinalized is
loaded in the CD recorder, the CD-R IN indicator may sometimes blink
for a while.
"OPC (Optimum Power Control)"
2. Start playback.
2
2
To stop playback
Skipping tracks
1
1
(The "CDR" input is selected automatically.)
Track No. being played
(Upper line)
Elapsed track playing time
(Lower line)
Playback of CD
Start playback/
To pause playback
2
2
To eject
a disc
Blinks
Lights
CD - R IN
CD - R IN
\
0
0
‡
CD -R
C D R
0 2
0 : 0 7
SINGLE
Advertisement
Table of Contents
