Table of Contents
Advertisement
Select the "CDR" input. Be sure to put the CD recorder in stop mode.
Erasing all tracks
Example: To record all tracks in a disc containing 15
tracks
1 Place a recordable CD-RW disc.
2 Press the ERASE key repeatedly until "Erase All ?"
is displayed.
3 Press the SET key.
4 Press the ENTER key to start erasure.
Never unplug the power cord during erasure.
If the power supply is interrupted by a power failure
or unplugging the power cord during erasure, the
data may be destroyed and become unplayable.
78
CLEAR
ERASE
SET
ENTER
÷ Ensure that the disc has no scratch or dirt on the surface.
÷ The "CD-RW" indicator should light. If the "FINALIZED
CD-RW" indicator lights, the disc is a finalized disc.
CD -R W
SKIP PLAY
Each press switches alternately.
"Erase 15 ?"
"Erase All ?"
Normal display
"ERASE" blinks
UN FINALIZE D
ERASE
SKIP PLAY
E r a s e
A l l ?
÷ To abort unfinalization, press the ERASE key or 7 STOP key.
UN FINALIZE D
ERASE
SKIP PLAY
E r a s e
O k ?
UN FINALIZE D CD -R W
ERASE
SKIP PLAY
C D R
Blinks
0 : 0 8
REMAIN
÷ The time until the completion of erasure is displayed.
÷ Do not perform any other operation during erasure.
÷ "Complete" is displayed when erasure completes.
÷ The counts of Skip Track registrations and cancel writing are
also reset.
XXXXXXXXXX
Erasure of CD-RW recording
Lights
Blinks
Blinks
73
Advertisement
Table of Contents
