Recording On Cd-R/Rw - Kenwood HM-982RW Instruction Manual

36

Recording on CD-R/RW

Even when the CD contains the recording of text
data, it is not copied onto the CD-R/RW.
Pause the recording
The label must be on top.
Do not touch the played surface
Stop the recording
4 4
1. Load a disc.
(Loading a CD-R/RW in the CD recorder)
1 Press CD recorder tray open/close (0) key.
2 Place a recordable CD-R or CD-RW disc.
3 Press CD recorder tray open/close (0) key.
÷ Ensure that the CD-R/RW has no scratch or dirt on the recording surface.
÷ If the CD-R/RW has previously been recorded, the end of the last track is searched
automatically to start recording from there.
The CD-R IN indicator blinks first, then it lights steadily when the disc has
been identified (now the disc is ready for recording).
÷ To record audio from a CD, load the source music CD in the CD player and load the
CD-R/RW in the CD recorder.
÷ If the CD-R IN indicator blinks after the tray has been closed, the disc cannot be
ejected.
÷ When "FINALIZED CD-RW" is displayed, additional recording to the disc is
possible after unfinalizing it.
When a non-used disc or a disc which has not been unfinalized is loaded
in the CD recorder, the CD-R IN indicator may sometimes blink for a while.
"OPC (Optimum Power Control)"
Recording on CD-R/RW
Pause the
Stop the re-
cording recording
1 1
Blinks
CD - R IN
78
2 2
Lights
CD - R IN
\
0 0
a
‡