Kenwood HM-982RW Instruction Manual page 55

Simultaneous, twin recording feature from CD to CD-R/RW and Tape
To record CD simultaneously onto an CD-R/RW and tape
Twin recording onto CD-R/RW and tape (TWIN REC)
All-track twin recording
Single-track twin recording
Reordering CD tracks in a desired sequence and recording them simultaneously onto CD-R/RW and tape
Program playback + TWIN REC
Program recording
Display "CDR Writing" indicates that recorded data is being written in the CD-R/RW. Do not apply vibrations or
impact during recording and "CDR Writing" display.
If the power cord is unplugged from the power outlet or a power failure occurs during recording, the disc data may
be destroyed and the disc may become unusable.
With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where
Note Note
recording is not possible. Please use single-side recording if this is to be avoided.
=
CD
\
Simultaneous recording of an entire CD onto an CD-
R/RW and tape.
Simultaneous recording of the CD track being played
\
onto an CD-R/RW and tape.
(This is convenient for recording of desired tracks
from a disc being heard for the first time.)
=
CD CDR
TAPE
\
Simultaneous recording of programmed CD tracks
onto both CD-R/RW and tape.
(Convenient for recording only the desired CD
tracks in the desired order.)
Convenient recording of CD player output
CDR TAPE
55
Á
Á
ˆ