Table of Contents
Advertisement
2
Before applying power
Units are designed for operation as follows.
Europe and U.K. ........................................................... AC 230 V only
Safety precautions
WARNING :
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LASER PRODUCT
The marking is located on the rear panel and says this product
has been classified as Class 1. It means that there is no danger
of hazardous radiation outside the product
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNI-
TUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC-
ING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
The marking of products using lasers
CLASS 1
Caution : Read this page carefully to ensure safe operation.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE
TO BEAM.
Inside this laser product, a laser diode classified as Class 3B
laser radiation is contained as alerted by the internal caution la-
bel shown above. To avoid exposure to laser beams, do not open
the cover.
Introduction
Advertisement
Table of Contents
