Download  Print this page

Kenwood HM-982RW Instruction Manual page 86

Sony instruction manual micro hi-fi component system hm-982rw
Hide thumbs

Advertisement

86
CD recorder messages
Displayed Message
PCA Full
PMA Full
Skip Full
TNO Full
Ready
Finalized Disc
Unfinalize Disc
Play Only
Rec Only
DAO Disc
*1 OPC and PCA : When a disc which has not been finalized is loaded in the CD recorder, it perform test writing
in a specific area in the disc in order to calculate the optimum laser irradiation intensity and
time for the disc. This operation is referred to as the OPC (Optimum Power Control)
processing and the area in which test writing is performed is referred to as PCA (Power
Calibration Area).
*2 TOC
: Any CD-R/RW contains the recording of TOC (Table Of Contents) data in addition to audio
signals. The TOC contains the non-rewritable data among that on the tracks, playing time and
text data.
*3 PMA
: With a CD-R/RW which is not finalized, the TOC data is temporarily written in a specific area in
the disc. The area in which the temporary writing is performed is referred to as PMA (Program
Memory Area). Additional writing in the PMA is performed every time recording or Skip Play
registration is made on the disc.
*4 DAO
: The DAO (Disc At Once) method is a recording formats with which all data are written in batch
in order of lead-in, data then lead-out. With this format, additional recording of data (in the
unused area of disc) is not possible.
Meaning
÷ Additional recording is not available
because the disc does not contain
the PCA*1 which is the area where
OPC*1 is applied.
÷ Additional recording is not available
because the disc does not contain
the PMA*3 which is the area for
temporarily writing the TOC data*2.
÷ The maximum number of skip regis-
tration writing is about to be ex-
ceeded.
÷ An attempt is made to record the
100th track in the disc.
÷ The system is entering record or
record-pause mode or is preparing for
finalization, unfinalization or erasure.
÷ An attempt is made to finalize or
record onto a finalized disc.
÷ An attempt is made to perform re-
peated playback with a non-finalized
disc.
÷ The loaded disc is a playback-only
disc.
÷ An attempt is made to erase a CD-R.
÷ An attempt is made to unfinalize a
disc which was been recorded in the
DAO*4 format on other equipment.
Displayed message list
In case of difficulty
Action
÷ Use a recordable disc.
÷ Use a recordable disc. (With a CD-RW, addi-
tional recording may become possible by
finalizing then unfinalizing the disc.)
÷ It is not permitted to write Skip Play registra-
tion for more than 22 times.
÷ It is not permitted to record 100 or more
tracks in a disc.
÷ This is a normal operation.
÷ Recording is not available with a finalized
CD-R. If additional recording on a CD-RW is
required, the disc should be unfinalized be-
fore recording. "Unfinalizing a CD-RW
(UNFINALIZE)"
÷ Repeated playback is not available with a
non-finalized disc. Finalize the disc before
performing its repeated playback. "Finaliz-
ing a CD-R/RW (FINALIZE)"
÷ Use a recordable CD-R/RW.
÷ The CD-R cannot be erased.
÷ This system cannot unfinalize such discs.
a

Advertisement

loading

  Related Manuals for Kenwood HM-982RW