Smart Antennas Interface Cable (Optional Accessory) - Novatel SMART2 Series Installation And Operation User Manual

APPENDIX A SMART2 Technical Specifications
A.6 SMART Antennas Interface Cable (Optional Accessory)
The NovAtel part number for the SMART Antenna interface cable is 01019944. This cable
provides access to all of the signals available on the SMART Antenna 14-pin Tyco Ampseal con-
nector. The exposed wires (BATT+ and BATT-) can then be connected to a vehicular power cir-
cuit (or equivalent) protected by a 5 A slow blow fuse (user supplied).
The following SMART Antennas use this cable:
SMART7
l
SMART7 with RELAY7
l
SMART2
l
Dimensions are in millimeters.
Table 19: SMART Antennas Interface Cable Connector Pin Out
COM1-TXD
COM1-RXD
SMART2 Installation and Operation Manual 1
Figure 22: SMART Antennas Interface Cable
Signal Name J1 J2 J3 J4 J5
1 2
2 3
E1 E2
73