Table of Contents
Advertisement
Chapter 1 SMART2 Overview
State
Green Solid
Green Slow Flash (1 Hz)
Yellow Solid
Yellow Slow Flash (1 Hz)
Yellow Fast Flash (3 Hz)
Red Solid (Initial)
Red Solid (Continuous)
Red Slow Flash (1 Hz)
Red Fast Flash (3 Hz)
1.4 Related Documents and Information
After the receiver is set up, the
primary source for command and log information.
Each receiver has a specific set of features, so some commands and logs may not be sup-
ported by your model.
This manual does not cover receiver service and repair. Contact a local NovAtel dealer for ser-
vice or repair inquiries (refer to Customer Support on page 9 for contact details).
SMART2 Installation and Operation Manual 1
Table 4: SMART2 Status LED
Precise solution good (RTK/PPP, Fixed or RTK/PPP+INS)
Precise solution converging
Basic solution (Single Point/SBAS/DGPS)
Tracking satellites and calculating initial position solution
Initialized and ready for communication
Power On/Reset (for about 10 seconds after power-on or reset)
Receiver system error, if indicator persists after 30 seconds
Position quality warning (unreliable/high error)
Position unavailable (unusable)
Agriculture Commands and Logs Reference Manual
Description
becomes the
13
Advertisement
Table of Contents
