Table of Contents
Advertisement
SMART2 Operation
1. Mount the SMART Antenna on the vehicle.
2. Measure and set the height of the SMART Antenna from the ground to the bottom of the
antenna.
3. Level the tilt sensor.
4. Save the Terrain Compensation configuration data.
Mount the SMART Antenna
The SMART Antenna must be mounted as close to the center of the vehicle as possible, as illus-
trated in Figure 8: SMART Antenna Installation below.
The SMART Antenna must be mounted with the connector facing the rear of the vehicle, as
shown in Figure 9: SMART Antenna Orientation below.
SMART2 Installation and Operation Manual 1
Figure 8: SMART Antenna Installation
Figure 9: SMART Antenna Orientation
29
Advertisement
Table of Contents
