Smart Antenna Interface Cable (Optional Accessory) - Novatel SMART2 Installation And Operation User Manual

APPENDIX A SMART2 Technical Specifications
A.6 SMART Antenna Interface Cable (Optional Accessory)
The NovAtel part number for the SMART Antenna interface cable is 01019944. This cable provides access to all
of the signals available on the SMART Antenna 14-pin Tyco Ampseal connector. The exposed wires (BATT+
and BATT-) can then be connected to a vehicular power circuit (or equivalent) protected by a 5 A slow blow fuse
(user supplied).
The following SMART Antennas use this cable:
SMART7
l
SMART7 with RELAY7
l
SMART2
l
The SMART Antenna interface cable is also compatible with the Ag-Star, SMART6 and SMART6-L.
Dimensions are in millimeters.
SMART2 Installation and Operation Manual v4
Figure 22: SMART Antenna Interface Cable
72