Check That The Smart Antenna Is Working; Smart Antenna Additional Equipment Required - Novatel SMART2 Series Installation And Operation User Manual

Hide thumbs Also See for SMART2 Series:
Table of Contents

Advertisement

Chapter 2   SMART2 Installation
2.6 Check that the SMART Antenna is Working
After the SMART Antenna is installed and powered up, use the following procedure to ensure the
receiver is operating.
1. Check that the Status LED
The Status LED may briefly flash as Red before moving quickly to the Fast Flash Yellow.
See SMART2 LED on page 12 for the LED location.
2. Send the following command:
LOG VERSION
The VERSION log is returned.
[COM1]<VERSION COM1 0 83.0
15699
<  8
<    GPSCARD "DSNLNNTMNT0G" "BMWR19050037L" "OEM2500-1.00"
"OA7CR0602RN0000" "OM7BR0100RBG000" "2019/Jun/28" "09:09:16"
<    EMBEDDED_AUTH "GSNNNNNNN" "?MWR?????????" "NO_HW_VER" "NO_EXPIRY_
DATE" "" "2019/Jun/28" "09:09:35"
<    APPLICATION "" "" "" "ES2AR0602RN0000" "" "2019/Jun/28" "09:09:43"
<    DEFAULT_CONFIG "" "" "" "ES2CR0602RN0000" "" "2019/Jun/28"
"09:09:58"
<    PACKAGE "" "" "" "ES2PR0602RN0000" "" "2019/Jun/28" "09:09:49"
<    ENCLOSURE "SMART2-TB" "NMVK19060013V" "" "" "" "" ""
<    BLUETOOTH "" "0081F91AFBBF" "BT121" "BT1210100RN0000" "1.2.0-208"
"2019/05/09" "15:16:47"
<    IMUCARD "IAM 20680" "" "" "" "" "" ""
The Log version output will vary depending on SMART Antenna hardware option.
3. Check that the Time Status is FINESTEERING which represents that time is fine set and
being steered.
4. Check the Receiver Status word (1a04c000 in this example). If the lowest bit (bit 0) is set,
the receiver has errors.
For information about the other digits in Receiver Status word, refer to the RXSTATUS
log.
2.7 SMART Antenna Additional Equipment Required
In order for a SMART Antenna to perform optimally, the following additional equipment is
required:
A computer (user supplied)
l
A cable harness for communicating with and powering the SMART Antenna (NovAtel
l
SMART Antennas Interface Cable (Optional Accessory) on page 73 is available with four DB-9
connectors, six bare cables and a SMART Antenna connector)
SMART2 Installation and Operation Manual 1
has changed from red to yellow or green.
FINESTEERING
1a04c000
2061 167959.862
3681
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart2-bSmart2Smart2-tb

Table of Contents