Table of Contents
Advertisement
SMART2 Operation
Proper bus termination is required.
Refer to SMART2 CAN Bus on page 36 for details instructions.
3.1.3 Bluetooth
SMART2-B and SMART2-TB receivers support the Bluetooth Serial Port Profile to provide wire-
less access to the receiver's internal COM6 port. Prior to connecting to this port, your device
must first be paired to the receiver.
Bluetooth support for Apple
Contact Apple for details about creating a custom application.
Pairing Bluetooth Devices on Windows 10
On a Bluetooth capable computer, perform the following steps.
1. Using the Windows key + I keyboard shortcut, open the Windows Settings app and select
Devices.
2. Select Bluetooth & other devices and after ensuring the Bluetooth switch is in the On pos-
ition, click Add Bluetooth or other device.
3. In the Add a device window, select Bluetooth.
4. Select the SMART2 receiver from the list of nearby Bluetooth devices.
5. Once Windows 10 has completed the pairing process, check which Bluetooth Serial Port num-
ber has been assigned to the receiver by selecting Devices and Printers.
6. Right-click on the SMART2 device and select Properties.
7. In the Properties window, select the Services tab. Ensure the Serial port box is checked and
record the assigned COM port.
3.2 Getting Started
The receiver's software resides in flash memory. When first powered, it undergoes a complete
self-test. If an error condition is detected during the self-test, the status word changes. This
self-test status word can be viewed in the header of any data output log. Refer to Messages in
the
Agriculture Commands and Logs Reference Manual
error occurs, contact your local NovAtel dealer. If the dealer cannot resolve the problem, con-
tact NovAtel Customer Support directly using one of the methods listed in Customer Support on
page 9.
3.2.1 Communicating with the Receiver
You can communicate with the receiver using NovAtel Connect or a terminal emulation program.
Detailed instructions for using NovAtel Connect are available from the Help system built
into NovAtel Connect.
When the receiver is first turned on, no data is transmitted from the COM ports except for the
port prompt.
SMART2 Installation and Operation Manual 1
®
Communications
®
products require that a custom application be developed.
for header information. If a persistent
23
Advertisement
Table of Contents
