Check That The Smart Antenna Is Working; Smart Antenna Additional Equipment Required - Novatel SMART2 Installation And Operation User Manual

Chapter 2 SMART2 Installation
2.5 Check that the SMART Antenna is Working
After the SMART Antenna is installed and powered up, use the following procedure to ensure the receiver is oper-
ating.
1. Check that the Status LED
The Status LED may briefly flash as Red before moving quickly to the Fast Flash Yellow.
See SMART2 LED on page 14 for the LED location.
2. Send the following command:
LOG VERSION
The VERSION log is returned.
[COM1]<VERSION COM1 0 83.0
15699
< 8
< GPSCARD "DSNLNNTMNT0G" "BMWR19050037L" "OEM2500-1.00"
"OA7CR0602RN0000" "OM7BR0100RBG000" "2019/Jun/28" "09:09:16"
< EMBEDDED_AUTH "GSNNNNNNN" "?MWR?????????" "NO_HW_VER" "NO_EXPIRY_
DATE" "" "2019/Jun/28" "09:09:35"
< APPLICATION "" "" "" "ES2AR0602RN0000" "" "2019/Jun/28" "09:09:43"
< DEFAULT_CONFIG "" "" "" "ES2CR0602RN0000" "" "2019/Jun/28"
"09:09:58"
< PACKAGE "" "" "" "ES2PR0602RN0000" "" "2019/Jun/28" "09:09:49"
< ENCLOSURE "SMART2-TB" "NMVK19060013V" "" "" "" "" ""
< BLUETOOTH "" "0081F91AFBBF" "BT121" "BT1210100RN0000" "1.2.0-208"
"2019/05/09" "15:16:47"
< IMUCARD "IAM 20680" "" "" "" "" "" ""
The Log version output will vary depending on SMART Antenna hardware option.
3. Check that the Time Status is FINESTEERING which represents that time is fine set and being steered.
4. Check the Receiver Status word (1a04c000 in this example). If the lowest bit (bit 0) is set, the receiver has
errors.
For information about the other digits in Receiver Status word, refer to the RXSTATUS log.
2.6 SMART Antenna Additional Equipment Required
In order for a SMART Antenna to perform optimally, the following additional equipment is required:
A computer (user supplied)
l
A cable harness for communicating with and powering the SMART Antenna (NovAtel SMART Antenna Inter-
l
face Cable (Optional Accessory) on page 72 is available with four DB-9 connectors, six bare cables and a
SMART Antenna connector)
A fused +7 to +30 VDC power supply (user supplied)
l
Refer to Power Supply Requirements for the SMART2 on the previous page for details.
SMART2 Installation and Operation Manual v4
has changed from red to yellow or green.
FINESTEERING 2061 167959.862 1a04c000 3681
21