Table of Contents
Advertisement
CP6002
Table 1-2:
CP6002 Main Specifications (Continued)
FEATURES
TPM
uEFI BIOS
Software IPMI
Operating Systems
ID 1036-6431, Rev. 2.0
Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security (on request)
AMI Aptio®, AMI's next-generation BIOS firmware based on the uEFI Specifi-
cation and the Intel Platform Innovation Framework for EFI.
LAN boot capability for diskless systems (standard PXE)
•
Redundant image; automatic fail-safe recovery in case of a damaged
•
image
Non-volatile storage of setting in the SPI Flash (battery only required for
•
the RTC)
Compatibility Support Module (CSM) providing legacy BIOS compatibil-
•
ity based on AMIBIOS8
Command shell for diagnostics and configuration
•
uEFI shell commands executable from mass storage device in a Pre-OS
•
environment (open interface)
IPMI support in the command shell
•
Board Management Controller Firmware providing the following features:
The BMC is accessible via two IPMBs and one KCS interface with inter-
•
rupt support
The BMC Firmware can be updated in field through all supported inter-
•
faces using the function "fwum..." of the open-source tool "ipmitool". For
further information on the ipmitool refer to the sourceforge.net website.
Two BMC Flash banks with automatic roll-back capability in case of an
•
upgrade firmware failure
Board supervision and control extensions such as board reset, power
•
and SPI Flash control, and boot order configuration
The board is offered with various Board Support Packages including Windows
and Linux operating systems. For further information concerning the operating
systems available for the CP6002, please contact Kontron.
SPECIFICATIONS
Introduction
Page 1 - 17
Advertisement
Table of Contents
