Table of Contents
Advertisement
Introduction
Table 1-2:
CP6002 Main Specifications (Continued)
FEATURES
DIP Switches
Reset Switch
Hot Swap Switch
System LEDs
Ethernet LEDs
Watchdog Timer
System Timer
Baseboard
Management
Controller
Thermal Management
Page 1 - 16
Three onboard DIP switches, SW1, SW2, and SW3, for board configuration
One front panel hardware reset switch
One switch for hot swap purposes integrated in the front panel handle in
accordance with PICMG 2.1 Rev. 2.0.
System Status LEDs:
I0/I1 (green):
Indicate the software status of the IPMI controller
•
WD (green):
Watchdog Status
•
TH (green):
Temperature Status
•
HS (blue):
Hot Swap Control
•
Debug LEDs:
DLED0-3:
Onboard LEDs for debugging purposes
•
(located on the rear side of the board)
Gigabit Ethernet Status on CP6002-R1:
ACT (green):
•
SPEED (green):
•
Gigabit Ethernet Status on CP6002-R1-MC and CP6002-R2-MC:
ACT (green):
•
SPEED (green / orange/off):
•
Software-configurable, two-stage Watchdog with programmable timeout
•
ranging from 125 ms to 4096 s in 16 steps
Serves for generating IRQ or hardware reset
•
The Intel® QM57 chipset contains three 8254-style counters which have
•
fixed uses
In addition to the three 8254-style counters, the Intel® QM57 chipset in-
•
cludes eight individual high-precision event timers that may be used by
the operating system. They are implemented as a single counter each
with its own comparator and value register.
NXP® ARM7 microcontroller with redundant 512 kB Firmware Flash and
•
automatic roll-back strategy
The BMC carries out IPMI commands such as monitoring several on-
•
board temperature conditions, board voltages and the power supply sta-
tus, and managing hot swap operations.
The BMC is accessible via two IPMBs (through the J1 and J2 connec-
•
tors) and one host Keyboard Controller Style (KCS) interface.
CPU and board overtemperature protection is provided by:
Temperature sensors integrated in Intel® Core™ i7 processor:
•
Two temperature sensors for monitoring the processor cores
•
One temperature sensor for monitoring the graphics controller and
•
the memory controller
One temperature sensor integrated in the Intel® QM57 chipset for mon-
•
itoring the chipset
One onboard temperature sensor for monitoring the board temperature
•
Specially designed heat sinks
•
SPECIFICATIONS
Ethernet Link/Activity
Ethernet Speed
Ethernet Link/Activity
Ethernet Speed
ID 1036-6431, Rev. 2.0
CP6002
Advertisement
Table of Contents
