Videx 4000 Series Technical Manual
  1. Manuals
  2. Brands
  3. Videx Manuals
  4. Intercom System
  5. 4000 Series
  6. Technical manual

Videx 4000 Series Technical Manual

Gsm audio intercom kit
Hide thumbs Also See for 4000 Series:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Instruction and Installation Manual
ENG
GSM AUDIO INTERCOM KIT
4000 Series GSM Audio Intercom with Proximity
GSM4K
GSM4KCR
66250754-EN
V1.0 - 18/02/19
Technical Manual
We recommend
This equipment is installed by a
Competent Electrician, Security or
Communications Engineer.

Advertisement

Table of Contents
loading

Related Manuals for Videx 4000 Series

Summary of Contents for Videx 4000 Series

  • Page 1 GSM AUDIO INTERCOM KIT 4000 Series GSM Audio Intercom with Proximity GSM4K GSM4KCR Technical Manual We recommend 66250754-EN This equipment is installed by a V1.0 - 18/02/19 Competent Electrician, Security or Communications Engineer.

  • Page 2: Declaration Of Conformity

    EU with no restrictions. This product follows the provisions of the European Directives 2014/30/EU (EMC); 2014/35/EU (LVD); 2011/65/EU (RoHS): CE marking 93/68/EEC. - 2 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 3: Table Of Contents

    System Operation ................................... 62 User Commands ....................................66 Additional User Information ................................67 User Management ..................................70 Troubleshooting ..................................... 72 General Information ..................................74 Notes ........................................ 75 - 3 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 4: Introduction

    SIM CARD SELECTION A SIM card is required for this product but not supplied by Videx. The GSM PRO intercom can only accept a standard size SIM card (refer to the following SIM card size chart), both a micro-SIM and nano-SIM are not suitable. It is recommended to choose the SIM card which has the best coverage for the area in which the intercom panel will be installed.
  • Page 5 Network provider and services configuration codes mentioned in this manual are specific for the UK. For overseas customers please contact the network provider of your country for the corresponding codes, however Videx offers no guarantee that any additional codes will work.

  • Page 6: System Components And Available Versions

    EXTENSION BUTTON MODULES The GSM intercom module will accept up to 50 call buttons. Any of the standard 4000 series button modules can be used as shown in Fig.2 along with their part numbers. Please note that button 1 is in the bottom right corner of the module counting up.
  • Page 7 GSM4K/GSM4KCR kit. The last digit of the frame code indicates the number of modules it will take. Frames are available in gun metal gray finish. The 4000 series mounting frames available are shown in Fig.5 (flush) and Fig.6 (surface) with the following tables showing the back box dimensions including the part numbers and dimensions for optional flush and surface 4000 series rainshields.
  • Page 8 Rainshield Dimensions (W x H x D) mm Art.4891 140 x 163 x 62 Art.4892 140 x 283 x 62 Art.4893 140 x 403 x 62 - 8 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 9 The relay time can be 01 - 99 seconds or set for latching (00). When in latching Fig. 9 mode, enter the code followed by ‘ENTER’ to latch and to unlatch the relay. - 9 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 10 1 Power supply 1 Art. 4810-2: 2 button GSM (pro) unit Art. 432 HDR-15-12 1 Art. 4903: 4000 series codelock 12Vdc 1.25A 1 Art. 4882: Surface mounting box - 10 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 11 IMPORTANT NOTE: The GSM audio kits listed above work on a 2G network. For the 3G variant remember to suffix the kit part no. with /3G, e.g. GSM4K-4/3G, GSM4KCR-6S/3G etc. All GSM audio kits are supplied with a HDR-15-12 12Vdc, 1.25A slim line power supply. - 11 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 12: Art. 4810 Technical Information

    +12V 12 - 24Vdc or ac power. 0V ground power. Auxiliary output 1 (open collector, 150mA max.). Auxiliary output 2 (open collector, 150mA max.). - 12 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 13 4000 events (unlimited when using remote logging facility) USB Port: micro USB Timebands: 1 call button timeband; 10 access control and 10 free access timebands Working Temperature: -10 +50 - 13 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 14: Art. 4903 Technical Information

    (this disables the secure lock release safe lock release for gate controls protection on the relay). Fig. 13 - 14 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 15 6. The ENGINEER'S CODE has been reset back to the factory default, 6x1 ("111111"), relays reset to 5 seconds and internal Fig. 15 access codes for RLY1 and RLY2 cleared. - 15 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 16 32 temporary codes (via RS485) Programming: Via keypad (standalone); RS485 bus terminal connections SMS text message (via RS485); GSMSK PC software (via RS485) Working Temperature: -10 +50 - 16 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 17: Art. 4850R Technical Information

    (amber = standby, green = access granted and red = access denied). PTE input & relay (C/NC/NO) terminals The reader is housed in a 4000 series module with a stainless steel or aluminium RS485 bus termination jumper surround front frame, see Fig.17.
  • Page 18 4. Both the green store LED and red delete LED will switch back ON and put the reader back into standby; Fig. 23 5. The reader is ready to be programmed. - 18 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 19 RS485 ground connection Programming: Tens, units, store & delete buttons (for unit ID & relay time only) RS485 bus terminal connections Working Temperature: -10 +50 - 19 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 20: Wiring Diagrams

    JP2 jumper to the NC1 position RS485 bus termination jumper in ON position RS485 BUS TERMINATION RS485 BUS TERMINATION Volt Free Contacts Fig. 25 Fig. 26 - 20 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 21 IMPORTANT NOTE: In instances where the current draw of the lock (fail secure or fail safe) exceeds the current rating of the HDR15-12 (1.25A) power supply a separate power supply with a sufficient current rating will be required to power the lock. - 21 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 22: Auxiliary Inputs/Outputs

    6 on the telephone during a call, as shown in Fig.31. Auxiliary output AO1 will only activate for the programmed time. To Antenna Art.4810 AO1 output will activate for the programmed time Fig. 31 - 22 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 23 ON, the GSM PRO module will announce “the phone is switched off please try later”). To Antenna Art.4810 Normally open (NO) switched input to enable and disable divert to master number Fig. 33 - 23 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 24 IMPORTANT NOTE: When auxiliary output AO1 is set to a particular mode (00 - 05) it cannot be used as an input/output for anything else. - 24 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 25 IMPORTANT NOTE: auxiliary input 2 has been specifically setup for this function and does not activate auxiliary output AO2. Refer to the notes at the top of this page for activating auxiliary output AO2. - 25 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 26: Usb & Rs485 Connection To A Pc

    *For end of line termination a 120 Ohm resistor must be fitted across the RS485 terminals A and B, as shown in Fig.39, but only if the GSM PRO intercom is the last device in line. - 26 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 27: Rs485 Network Connection

    (2 core twisted or CAT-5 where: 1 core = A, 1 core = B, 1 pair = 0V/GND) RS485 bus wires and common GND wire. Networked Art.4850R readers and Art.4903 keypads (UNIT ID’s 4, 5, 6, 7 and 8) Fig. 40 - 27 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 28 Volt Free Contacts RLY1 Volt Free Contacts RLY1 Fig. 41 IMPORTANT NOTE: For each additional Art.4903 keypad a 12Vdc power supply (HDR-15-12) will be required. - 28 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 29 Volt Free Contacts Volt Free Contacts Fig. 42 IMPORTANT NOTE: For each additional Art.4850R proximity reader a 12Vdc power supply (HDR-15-12) will be required. - 29 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 30: General Directions For Installation

    Videx DO NOT recommend these types of cable. GENERAL INSTALLATION NOTES •...
  • Page 31 IMPORTANT: IT IS RECOMMENDED THAT ANY CABLING AND VIDEX PRODUCTS BE INSTALLED BY A COMPETENT AND QUALIFIED ELECTRICIAN, SECURITY INSTALLATION SPECIALIST OR COMMUNICATIONS ENGINEER. • DO NOT install any Videx product in areas where the following may be present or occur: • Excessive oil or a grease laden atmosphere.
  • Page 32 IMPORTANT NOTE: IT IS IMPORTANT TO REGULARLY MAINTAIN THE “UP KEEP” OF THE GSM PRO PANEL (CLEANING AND GENERAL MAINTENANCE ETC.) ANY FAULT OR DAMAGE THAT MAY OCCUR TO THE GSM PRO PANEL DUE TO THE LACK OF CLEANING AND MAINTENANCE IS NOT THE RESPONSIBILITY OF VIDEX. - 32 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 33: Fitting The Sim & Connecting Power

    LED will stop flashing to indicate that the GSM module has registered with the network, as ...delay 15 secs... shown in Fig.59. Fig. 58 5. The GSM PRO intercom is ready to be programmed..delay 15 secs... Fig. 59 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 34: Reset Procedure

    4. After the 4th beep remove the short, as shown in Fig.65..delay... 5. All settings on the GSM PRO module are returned to factory defaults. Fig. 64 Fig. 65 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 35: 4000 Series Back Box Installation

    4000 Series GSM Audio Intercom with Proximity 4000 Series Back Box Installation EXAMPLE: INSTALLING A 4000 SERIES FOUR MODULE BACK BOX Fig. 66 Fig. 67 Fig. 68 Fig. 69 Fig. 70 Fig. 71 Fig. 72 Fig. 73 Fig. 74 Fig. 75 Fig.
  • Page 36 • Edit the card name then replace it inside the holder and refit: insert the holder inside its housing from the left or right side then push the other side until it clips into place. - 36 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 37: Programming The Gsm Intercom

    Trigger the auxiliary output AO1 A1O 1111A1O Trigger the auxiliary output AO2 A2O 1111A2O Store balance check dial string 1111SDL”*#1345#” Check credit balance 1111BAL? 45 - 46 - 37 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 38 1 1111PIN”code”12 code = 4 - 8 digit unless specified and/or 2 respectively access code 1, 2 = relay to activate - 38 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 39 4th number). The messages to store/check numbers are as follows (replace STN with STD, STE or STF when storing/checking divert numbers). - 39 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 40 MEM (DIVERT 1) 005 = 01912241558 MEM (DIVERT 2) 005 = 07771234567 MEM (DIVERT 3) 005 = 01912241559 OK VIDEX GSM Remember to include “ and , where appropriate. - 40 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 41 GSM PRO starts checking for free memory locations from 001 to see if there is enough available space to store them. So if the - 41 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 42 40 seconds. The following messages can be used to set/check the maximum call time. 1111SPTnn Store the time nn x 20 seconds (e.g. nn = 03, time = 60 seconds). - 42 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 43 Store the AO1 mode nn = 00 - 05. Also send a confirmation text back to the sender. 1111A1M? Query the current stored AO1 mode. A text message will be sent back to the sender showing the stored A1O mode. - 43 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 44 Other useful numbers which can be used with this feature are as follows. Please also check the network service provider’s web sites for other useful codes. Vodafone DISABLE VOICEMAIL 1210 1760 DISABLE TEXT ALERTS #148# 1760 - 44 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 45 IMPORTANT NOTE: Videx are only aware of the balance check dial string codes for the network providers mentioned above. Check dial string codes for other networks are currently unavailable at this time. Please also note that this programming function is only applicable for pay as you go SIM cards.
  • Page 46 Auxiliary output AO2, like auxiliary output AO1, can be latched. To latch auxiliary output AO2 the following text message can be sent to the GSM PRO intercom. 1111A2L Latch auxiliary output AO2. - 46 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 47 (Art.4850R) and keypads (Art.4903) the access control timebands can be used to manage access rights (i.e. when fobs/cards or access codes can be active for on the proximity - 47 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 48 It should also be noted that the ATB timebands feature cannot be used alone it must also be used in conjunction with the access levels feature ACC described on the following page. - 48 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 49 Including a ? at the end of the command the GSM PRO intercom will reply with the following text: AL8 = “1010101010”,”11001100” OK VIDEX GSM Remember that each timeband would be programmed using the store timeband command ATB (see previous pages). - 49 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 50 GSM PRO intercom. 1111CHK? Check the current status of auxiliary output AO1 and send a confirmation text back to the sender. - 50 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 51 (mobile no.) is switched off. The default for this function is disabled (set to 00). The following texts can be used to enable or disable this function. - 51 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 52 Will not read fobs/cards programmed with only 2 bytes (5 digit) information. 4 bytes Will not read fobs/cards programmed with only 2 bytes (5 digit) or 3 bytes (8 digit) information. - 52 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 53 • 955/T or 955/C = Videx fobs or cards. These fobs and cards have no site code and have a 5 digit user code, so the PBY function must be set to 02 (the default setting, checking for 2 bytes).
  • Page 54 Query the access code stored in memory location nnn and send a confirmation text back to the sender with details of where code is stored and which relays will be activated. - 54 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 55 Example 2: Programming an access code of 15432, storing it to the next free memory location (if locations 000 - 125 are occupied) and assigning it to access level A3, the following text can be sent to the GSM PRO intercom: - 55 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 56 IMPORTANT NOTE: Remember that the maximum number of temporary codes that can be stored is 32. In the event that the temporary codes validation expires the GSM PRO intercom will delete the code from the memory. - 56 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 57 When the timeband reaches the end time the selected output will trigger again for the programmed output time, for example if the relay was setup to trigger - 57 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 58 GSM PRO intercom. It can locate the number either from using the full telephone number or a minimum of the last 4 digits of a number (see following examples). The following text messages can be used. - 58 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 59 GSM’s button matrix. 1111BUTnn Simulate a button press for button number nn, where nn = button number 01 - 50. - 59 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 60 For the application of these commands please contact Videx Technical on tel: 0191 224 3174 for UK based customers and Videx customer support on tel: +39 0734 631699 for overseas customers.
  • Page 61 Fig.86. It is recommended that you contact Videx Technical on tel: 0191 224 3174 for UK based customers and Videx Customer Support: +39 0734 631669 for overseas customers for advise on how to do this.

  • Page 62: System Operation

    GSM’s speaker after the brief pause to indicate that the divert number is being called. - 62 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 63 IMPORTANT NOTE: The onboard reader can be enabled and fobs/cards can also be programmed and setup using the GSMSK PC software, more information on how to do this can be found in the GSMSK manual: GSMSK_66251720_EN_V2-0 or later). - 63 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 64 (00) the push to exit button will operate as a “toggle” switch to latch the relay Fig. 103 open and latch the relay closed. - 64 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 65 GSM’s speaker i.e. “the gate is open” etc. (provided that the speechboard is also switched ON) when an access code is entered on the keypad. - 65 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 66: User Commands

    4 - The balance can only be checked if the correct balance check string has been stored (also see SDL notes on page 45 - 46). This feature is only applicable for pay-as-you-go SIM cards. - 66 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 67: Additional User Information

    Where this is not possible an alternative high gain antenna can be used, in particular Videx recommends using the ANT-GSM-2dB-5M or ANT-GSM-2dB-15M high gain antennas or another suitable GSM antenna with a standard SMA male connector.
  • Page 68 3. Check to see if expansion readers have correct unit ID’s set (the unit ID for the onboard reader will always be set to ID.1). - 68 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 69 GSM (no further action required as this is normal). - 69 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 70: User Management

    A note of the free access timebands (FRE) should be kept (from 0 to 9), following the table format below: TIMEBAND NO. ON TIME OFF TIME AO1 AO2 LAT Timeband 0    Timeband 9 - 70 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 71 MANAGING GSM EVENTS REMOTELY Users can also remotely monitor events in real-time from the GSM PRO module using Videx’s web browser based events application. These events can then be viewed on any device such as a tablet, smartphone, laptop and PC.

  • Page 72: Troubleshooting

    UNICODE and is set to either GSM alphabet or Automatic. This can ususally be done via the etc. settings icon on the smartphone. If you are unsure of how to do this Videx recommend consulting with the user’s manual that came with the smartphone or consulting directly with the manufacturer of the smartphone.
  • Page 73 3. After the GSM intercom has rebooted test the door opening feature from the telephone during a call. If neither of the above solutions resolve the problem then please contact Videx technical on tel: 0191 224 3174 for further assistance. For overseas customers contact Videx customer support on tel: (+39) 0734 631 699 for further assistance.

  • Page 74: General Information

    • I.E.E. Wiring Regulations BS7671 For overseas customers it is recommended that you consult with the relevant governing body for the appropriate regulations and standards of your country. - 74 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...

  • Page 75: Notes

    4000 Series GSM Audio Intercom with Proximity Notes - 75 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 76 4000 Series GSM Audio Intercom with Proximity Notes - 76 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 77 4000 Series GSM Audio Intercom with Proximity Notes - 77 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 78 4000 Series GSM Audio Intercom with Proximity Notes - 78 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 79 Een juiste verwijdering van AEEA’s draagt bij tot hergebruik, recycling en terugwinning, en voorkomt potentiële ne- gatieve effecten op het milieu en de menselijke gezondheid door de mogelijke aanwezigheid van gevaarlijke stoffen. - 79 - 4000 Series GSM Audio Intercom - Technical Manual 66250754-EN - V1.0 - 18/02/19...
  • Page 80 MANUFACTURER VIDEX ELECTRONICS S.P.A. FABBRICANTE Via del Lavoro, 1 FABRICANT 63846 Monte Giberto (FM) Italy FABRICANTE Tel (+39) 0734 631669 FABRIKANT Fax (+39) 0734 632475 ‫الشركة المص ن ّ ِ عة‬ www.videx.it - info@videx.it CUSTOMER SUPPORT VIDEX ELECTRONICS S.P.A. UK Customers only: SUPPORTO CLIENTI www.videx.it - technical@videx.it...

This manual is also suitable for:

Gsm4k-1sGsm4kcr seriesGsm4k seriesGsm4k-2sGsm4kcr-1Gsm4kcr-1s ... Show all

Table of Contents