Videx 4000 Series Technical Manual page 61

4000 Series GSM Audio Intercom with Proximity
Programming the GSM Intercom
OBTAIN THE GSM'S IMEI NUMBER (IME)
If the IMEI number (unique 15 digit number of the main internal hardware chip) of the GSM PRO intercom is required the following
text message can be sent to obtain the number.
1111IME?
Example: Obtain IMEI number of the GSM module, the following message can be sent to the GSM intercom:
The GSM PRO intercom will reply with the following text:
IMPORTANT NOTE: If installing the GSM PRO for the first
time, when registering the SIM card with the chosen network
provider they may ask for the IMEI number of the GSM module.
As the programming command described above will only work
with a SIM card that has already been registered with a network
the command will not work.
Instead to obtain the GSM's IMEI number, which is located on
the main hardware chip internally, the GSM module will have
to be opened. The IMEI number is printed on the Telit chip label
just below the model number, as shown in Fig.86.
It is recommended that you contact Videx Technical on tel: 0191 224 3174 for UK based customers and Videx Customer Support:
+39 0734 631669 for overseas customers for advise on how to do this.
Alternatively use a SIM that is already registered with another network provider and fit it into the GSM PRO intercom (following
the procedure on page 33 for initialisation), then use the programming command above 1111IME? to obtain the GSM PRO's
IMEI number so that when registering the actual SIM that will be used with the GSM PRO with the chosen network you will have
the appropriate IMEI number to hand.
4000 Series GSM Audio Intercom - Technical Manual
Query IMEI number of the GSM module, also send confirmation to the sender.
1111IME?
IMEI-357803045065535
OK VIDEX GSM
- 61 -
IMEI number
GL865-DUAL V3
IMEI: 357803045065535
Fig. 86
UL865-EUR
IMEI: 355856050228416
66250754-EN - V1.0 - 18/02/19