Videx 4000 Series Technical Manual page 41

4000 Series GSM Audio Intercom with Proximity
Programming the GSM Intercom
STORING A DIAL TO OPEN NUMBER (STR)
Dial in door release allows users to release the door/gate simply by dialling the telephone number of the SIM in the GSM PRO
intercom panel. The intercom panel will check the callers ID when it receives a call and if it matches the list of stored numbers, it will
clear the call down (avoiding the caller being charged for the call) and will activate the relay for the programmed time. Up to 1000
numbers can be stored (000 - 999). The messages to check, store or delete numbers are as follows.
1111STRnnn"yyyyyyyyyyy"
1111STRnnn"yyyyyyyyyyy"?
1111STRnnn?
1111STRnnn""
1111STRnnn""?
IMPORTANT NOTE: It is important to switch OFF voicemail and automatic SMS features on the SIM card in the GSM intercom
when using this feature (see the 'Forced Dial' section for more details). Also note that it will not be possible to use the dial in to
speak facility from a number stored to release the door/gate when dialling in (door release takes priority).
Please also note it is important that the number stored, when dialling in to release the door/gate, must have any "caller ID" or
"withhold or witheld number" function switched OFF on the telephone/mobile that is making the call to the GSM intercom. If
this feature is not switched OFF the GSM intercom will not recognise the caller's number and no further action will take place.
STORING UP TO 5 DIAL TO OPEN NUMBERS IN A SINGLE TEXT MESSAGE TO THE NEXT AVAILABLE LOCATIONS (STR)
It is also possible to program up to a maximum of 5 dial to open numbers (DTO) at a time to the next available memory locations
and in a single text message instead of programming them individually. Expanding on the existing STR programming command
the text messages used to store/check the dial to open numbers are as follows.
1111STR"n1"
1111STR"n1","n2"
1111STR"n1","n2","n3"
1111STR"n1","n2","n3","n4"
1111STR"n1","n2","n3","n4","n5"
1111STR"n1" ?
1111STR"n1","n2"?
1111STR"n1","n2","n3"?
1111STR"n1","n2","n3","n4"?
1111STR"n1","n2","n3","n4","n5"?
For example to store the following 5 dial to open numbers (DTO): 01912243174 (n1), 01912241558 (n2), 07771234567 (n3),
01912241559 (n4) and 07897123456 (n5) respectively to start from the next available memory location, the following single text
message would be sent to the GSM intercom instead of sending 5 individual text messages:
1111STR"01912243174","01912241558","07771234567","01912241559","07897123456"
Similarly if only 3 dial to open numbers (DTO) n1, n2 and n3 were required, the following message would be sent:
1111STR"01912243174","01912241558","07771234567"
Remember an optional ? can be included at the end of the message to receive confirmation of the stored numbers, like so:
1111STR"01912243174","01912241558","07771234567","01912241559","07897123456"?
The following reply will be received from the GSM PRO:
MEM OPEN 003 = 01912243174
MEM OPEN 004 = 01912241558
MEM OPEN 005 = 07771234567
MEM OPEN 006 = 01912241559
MEM OPEN 007 = 07897123456
OK VIDEX GSM
Remember to include " and , where appropriate. In the example above if locations 001 and 002 already had numbers programmed
then the dial to open numbers (DTO) n1, n2, n3, n4 and n5 would be stored in the GSM PRO starting from location 003 up to 007.
IMPORTANT NOTE: It should be noted that when programming multiple dial to open numbers (DTO) using this command the
GSM PRO starts checking for free memory locations from 001 to see if there is enough available space to store them. So if the
4000 Series GSM Audio Intercom - Technical Manual
Store the telephone number yyyyyyyyyyy in position nnn, where nnn = 000 - 999.
Store the telephone number yyyyyyyyyy in position nnn, where nnn = 000 - 999, and send
a confirmation text message to confirm storage of new number.
Query the telephone number stored in location nnn, where nnn = 000 - 999. A text
message will be sent to the sender with the stored number for that location.
Delete the telephone number stored in location nnn, where nnn = 000 - 999.
Delete and confirm deletion of a telephone number in location nnn, where nnn = 000 -
999.
Store the dial to open numbers (DTO) to the next available memory location(s),
where n1 = 1st DTO number, n2 = 2nd DTO number, n3 = 3rd DTO number, n4
= 4th DTO number, n5 = 5th DTO number.
Store the dial to open numbers (DTO) to the next available memory location(s),
where n1 = 1st DTO number, n2 = 2nd DTO number, n3 = 3rd DTO number, n4
= 4th DTO number, n5 = 5th DTO number, also send confirmation text of DTO
numbers and locations of where they are stored.
- 41 -
66250754-EN - V1.0 - 18/02/19