Table of Contents
Advertisement
• Video memory records always
If activated, this function can be used to record images and audio (10
sec.) from the external unit, even if the call is answered.
1. Access the installer menu.
2. Select the Special Settings menu by pressing
to access it.
INSTALLER MENU
Special Settings
3. Select the Video memory records always menu by pressing
and press
to access it.
VIDEO MESSAGE RECORDING
Video mem. records always
4. Press
to enable it.
VIDEO MESSAGE RECORDING
Video mem. records always
5. Press
to exit and save the changes.
60
• Activate output
Planux monitors are equipped with an NC/NO output which can be
programmed as monostable or bistable. This output can be controlled
by one of the buttons on board the monitor, or by one of the inputs if
suitably confi gured with the
,
and press
1. Access the installer menu.
2. Select the Special Settings menu by pressing
to access it.
,
3. Select the Activate output menu by pressing
to access it.
4. Select the fi elds which can be changed using
value using
• The output is set as Normally open by default; tick the box next to
Normally open to change this setting to Normally closed.
• The output is set as Monostable by default; tick the box next to
Monostable to change this setting to Bistable.
• Fill in the Activation period fi elds for Monostabile mode.
5. Press
Activate output function.
INSTALLER MENU
Special Settings
SPECIAL SETTINGS MENU
Alarms
Set ringtone repetition
Set call times
Set automatic answer
Video mem. records always
Activate output
,
or
.
Activate output
Normally open
Monostable
Activation period
0 5 , 0 0
Seconds
Minutes 0 0
0 0
0 0
Hours
Days
Left
Right
to exit and save the changes.
,
and press
,
and press
,
and change the
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VIP System and is the answer not in the manual?