Setting The Alarm Function; Setting The Ringtone Repetition - Comelit VIP System Installer Manual

• Setting the Alarm function

This menu can be used to set the VIP address which will be contacted
when a priority call is sent. The procedure applies for all 4 call types; the
example below illustrates a Panic priority call.
1. Access the installer menu.
2. Select the Special Settings menu by pressing
to access it.
INSTALLER MENU
Special Settings
3. Select the Alarms menu by pressing
SPECIAL SETTINGS MENU
Call
Self-ignition
Actuator
Door open
Alarms
Set ringtone repetition
4. Select the call type and press
Alarms
Alarm
Panic
Fire
Priority call 4
5. Select the fi elds which can be changed using
value using , or .
CONFIGURE ALARMS
Active:
ViP address:
0 0 0 0 0 2 0 0
Audio message
Left Right
6. Press to exit and save the changes.
58
, and press
, and press to access it.
.
, and change the

• Setting the ringtone repetition

1. Access the installer menu.
2. Select the Special Settings menu by pressing
to access it.
INSTALLER MENU
Special Settings
3. Select the Set ringtone repetition menu by pressing
press to access it.
SPECIAL SETTINGS MENU
Call
Self-ignition
Door open
Alarms
Set ringtone repetition
Set call times
4. Use buttons , to select for which type of call you wish to set the
function.
SET RINGTONE REPETITION
External call
0 0 1
Intercom call
Floor door call
Left Right
5. Use buttons , to change the number of repetitions as desired for
the type of call selected.
SET RINGTONE REPETITION
External call
Intercom call
Floor door call
Left Right
6. Press to exit and save the changes.
, and press
,
0 0 1
0 0 1
0 0 3
0 0 1
0 0 1
and