Table of Contents
Advertisement
ES3000 V5 NVMe PCIe SSD
User Guide
Step 2 Access the software package directory, such as the D:\ directory.
Step 3 Install the Windows driver and tool package. For details, see
Driver in Windows
The SNMP module is included in the tool package. Installing the tool package also installs the
SNMP module.
----End
Uninstalling the Software
Step 1 Log in to the OS as an administrator.
Step 2 Uninstall the Windows tool package. For details, see
Windows.
----End
C.3 Configuring the SNMP Function in Linux
This section describes how to configure the SNMP function in Linux.
Preparations
Before configuring the SNMP function, check that:
l
l
l
Installing the Software
Step 1 Log in to the OS as the root user.
Step 2 Access the software package directory, such as the /root directory.
Step 3 Install the Linux driver and tool package. For details, see
Driver in Linux
Step 4 If the snmpd.conf file is in /usr/local/share/snmp/snmpd.conf, run the following command
to open the file:
vim /usr/local/share/snmp/snmpd.conf
Step 5 Add content as follows:
l
l
Issue 07 (2019-03-19)
and
3.7.2 Installing the Tool Package
You have correctly installed the ES3000 V5 on the server.
Net-SNMP is correctly installed in Linux and you have determined the Net-SNMP
software version by running the following command:
[root]#snmpd -v
You have determined the directory storing the snmpd.conf file as follows:
[root]#net-snmp-config --snmpconfpath
/usr/local/share/snmp
and
3.7.1 Installing the Tool Package
If the Net-SNMP version is 5.6, add the following content to the snmpd.conf file:
dlmod es3000v3 /usr/lib/hioadmsnmp_5.6.so
If the Net-SNMP version is 5.7, add the following content to the snmpd.conf file:
dlmod es3000v3 /usr/lib/hioadmsnmp_5.7.so
Copyright © Huawei Technologies Co., Ltd.
3.6.2 Installing the ES3000 V5
(Windows).
5.3.2 Uninstalling the Tool Package in
3.6.1 Installing the ES3000 V5
(Linux).
C SNMP Function
212
Advertisement
Table of Contents
