Table of Contents
Advertisement
ES3000 V5 NVMe PCIe SSD
User Guide
5.12 Removing an ES3000 V5
Operation Scenario
l
l
Preparations
Before removing an ES3000 V5 NVMe PCIe SSD, make the following preparations:
l
l
5.12.1 Removing a Non-Hot-Swappable ES3000 V5 NVMe PCIe
SSD Disk
Prerequisites
Wear ESD gloves.
Procedure
Step 1 Determine the position of the drive in the server and power off the server.
Step 2 Press the ejector release button. See (1) in
Issue 07 (2019-03-19)
Removing an ES3000 V5 NVMe PCIe SSD disk
– If the system does not support hot swap, the method for removing an NVMe PCIe
SSD is the same as that for removing a common drive. For details, see
Removing a Non-Hot-Swappable ES3000 V5 NVMe PCIe SSD
– If the system supports hot swap, hot-swap an NVMe PCIe SSD disk. For details,
see
5.12.2 Removing a Hot Swappable ES3000 V5 NVMe PCIe SSD
NOTE
Hot swap: Users are allowed to take out and replace faulty drives, PSUs, or cards when the
system is not stopping or the power is not switched off. Surprised hot swap and orderly host
swap are supported. For details, see
Removing an ES3000 V5 NVMe PCIe SSD card
– If PCIe card slots are on a riser card, the SSD card needs to be removed from the
riser card. For details, see
Card from a Riser
– If PCIe card slots are on the mainboard, the SSD card needs to be removed from the
mainboard. For details, see
Card from the
Mainboard.
Wear ESD gloves.
Used to prevent ESD damage when you insert, remove, or hold the ES3000 V5 or a
precision device.
Back up data.
– Stop the access to a hot swappable SSD disk.
– Stop the services on the server and power off the server if you need to remove a
non-hot-swappable SSD disk or an SSD card.
Copyright © Huawei Technologies Co., Ltd.
4 Hot Swap4 Hot
5.12.3 Removing an ES3000 V5 NVMe PCIe SSD
Card.
5.12.4 Removing an ES3000 V5 NVMe PCIe SSD
Figure
5-8.
5 Maintenance and Upgrade
5.12.1
Disk.
Disk.
Swap.
95
Advertisement
Table of Contents
