Supported Set Feature Commands - Huawei ES3000 V5 User Manual

ES3000 V5 NVMe PCIe SSD
User Guide
Bytes
136
142:137
143
144
146:145
147
148
154:149
155
156
158:157
159
160
166:161
167
A.5 Supported Set Feature Commands
Besides SMART information, the host can use the Get Features command to obtain feature
parameters related to working and health status. The ES3000 V5 can also use the following
Set Features commands defined by NVMe 1.3 to change the feature parameter settings:
l
l
l
l
l
l
l
l
l
l
l
Issue 07 (2019-03-19)
Description
Reserved
Current Raw Value (Nand Bytes Written)
Reserved
Host Bytes Written Count
Reserved
Normalized Value (Host Bytes Written)
Reserved
Current Raw Value (Host Bytes Written)
Reserved
F6 (System Area Life Remaining)
Reserved
Normalized Value(System Area Life Remaining)
Reserved
Current Raw Value(System Area Life Remaining)
Reserved
Arbitration (Feature Identifier 01h)
Power Management (Feature Identifier 02h)
Temperature Threshold (Feature Identifier 04h)
Error Recovery (Feature Identifier 05h)
Number of Queues (Feature Identifier 07h)
Interrupt Coalescing (Feature Identifier 08h)
Interrupt Vector Configuration (Feature Identifier 09h)
Write Atomicity (Feature Identifier 0Ah)
Asynchronous Event Configuration (Feature Identifier 0Bh)
Timestamp (Feature Identifier 0Eh)
Software Progressor Marker (Feature Identifier 80h)
Copyright © Huawei Technologies Co., Ltd.
A Supported NVMe Commands
164